Portable Vet Syringe Infusion Pump Veterinary Electric Syringe Infusion Pump Veterinary Pump for Clinic Hospital

Basic Info

Group	Adult
Usage	ICU, Ccu, Operation Room, Neonatal Care, Pediatric
Power	AC220 and DC12V
Transport Package	1PCS/Carton
Specification	55*33*65(CM)
Origin	China
Production Capacity	10000PCS/Week

Product Description

Products Details

Feature:

Portable Design
One-key operation to fulfill conversion between d/min and ml/h;System self-test is completed as turning on, which ensures safe work;Display with LCD and LED to make remote observation possible;Lower noise and less vibration are supported by application of motor driver IC imported from German and motor imported from Japan.

Drop sensor(Optional) Remotely control infusion processes to realize safer and precise infusion.Pressure Monitoring3 Levels of occlusion pressure are available(high/medium/low).Dual CPUSafety are guaranteed by dual CPU design.Voice Alarm SystemExclusive technology to fulfill combination of human voice, legible words and lights.

Parameter

Model	BYS-820& BYS-820D
Infusion Rate	ml/h mode:1~1200ml/h(1ml/h step) drop/min mode:1~266drop/min(1drop/min step)
Purge Rate	100mh/h---1200ml/h(can be calibrated)
Flow Rate Accuracy	ml/h mode:Within±5%(after correct calibration) drop/min mode:Within±3%(after correct calibration)
Mechanical Precision	Within±2%
Maximum infusion pressure	150kPa
Volume Limit	1ml-9999ml
Total Infusion Volume	0---9999.9ml
Alarm Pressure	High 800mmHg±200mmHg(106.7kPa±26.7kPa) Medium 500mmHg±100mmHg(66.7kPa±13.3kPa) Low 300mmHg±100mmHg(40.7kPa±13.3kPa)
Audible and Visible Alarms	There are bubbles,Tube is blocked,Close the door,IV set Mismatched,Battery running out,Infusion finish,Equipment failure,Abnormally Operation,Software Exception,Low battery, forget the operations etc
Power Source	100-240Vac,50/60Hz;Internal rechargeable Li battery,capacity³1800mAh,voltage=11.1V,4 hours backup time at the rate of 25ml/h(appointed medium rate in IEC60601-2-24)for the new battery charged for 12 hours.
Bubble Detector	Ultrasonic ware detector;detecion sensitivity³25μL
KVO Speed	1m/h---5ml/h(1ml/h step)
Power Consumption	35VA
Fuse	T2AH/250V,2pcs installed
IP Classification	IPX2
Equipment Classification	Class I,intermal power supply,Type CF
Operation Environment	Temperature +5---+40 degree Relative Humidity 20---90%
Transport&Storage Condition	Temperature -20ºC~+55ºC Relative Humidity £95% Atmospheric Pressure 50.10KPa---106.0KPa
Infusion Set	Compatible with any brand of infusiong sets ater correct calibration The following brands of infusiong sets are recommended:GEA,Onemed,SHINVA
Infusion maximum value (under single fault condition)	1ml
Forbidden	Not support blood Infusion
Dimension	140mm(L)´157mm(W)´220mm(H)
Net Weight	1.8kg

Certificates

Factory
Anhui Huaan Medical Products Imports and Exports Corporation Limited was founded in 2007. After several years' development, our company is today one of the professional supplier of Disposable medical consumables.Our full range of products included IV catheter, safety syringes, auto disable syringes, auto disposable syringes for fixed dose immunization, disposable syringes, insulin syringes, BCG vaccine syringes, tuberculin syringes, colored syringes, douching syringes, infusion sets, transfusion sets, infant infusion sets, hypodermic needles, scalp vein sets, medicine container, needle destroyer, medical cap, medical non-woven face mask, medical latex gloves, disposable surgical gowns and so on. We have been familiar with the high quality standards in this area from the beginning. Our company has been working with a quality management system according to ISO for years. Quality always is the first concern of us. Today, our products are shipped to all over the world, such as Europe, Middle East, Africa, South America, and Asia as well. Providing 'Quality Products, Excellent Service, Competitive Prices and Prompt Delivery', we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more details.

 

Related Products
Exhibition
FAQ
Q1: What is your product certificate?
A:ISO CE certificatesQ2:Where is your factory located?
A:Our factory is located in Anhui.
Q3:How many cylinders do you produce everyday?
A: We can produce 10000 pieces everyday.Q4: Can you provide sample?
A: Yes, we can provide you sample, but you need to pay for the sample and freight firstly.We will return the fee after you make an order.Q5: Can you use our brand?
A: Yes, OEM is available.